The number of the joint factors will reduce in addition to the assembly workmanship of the surface being coated by using
the sandwich panels, manufactured in lengths up to 18 meters, in the buildings. With the developed transportation and
carriage means, the higher wall and roof surfaces may be coated in a short time. 10 min./m2
meeting time for the walls
and 8 min./m2 meeting time for the roofs can be utilized as data. Whilst the sandwich panel does not limit the amount of
the structure or the height of the building, the restrict values are decided according to the bearing construction.
Though the standard part and limited size alternatives of the sandwich panels, unlimited design
alternatives are offered to the designers. The partitions gain visible mobility by means of utilizing variable colours or coating the
panels in vertical, horizontal or angled positions. Even with the aid of the multi-purposed panels in the interior elements, the
design potentialities of the designers improve.
The joint details cover the points related from panel to panel and from panel to the bearing construction. Tight joints
that fulfill the insulation functions could be provided by using double lamp-bush type in the wall panels and usually
using lamp-bush type within the roof panels as well as using lateral overlay. What is expected from the joint factors certainly
is the air-tightness, thermal insulation and simple assembly possibility. What is required with easy meeting is the complete
settlement of the elements to each other with out difficulty. As a result of the performed searches, it has been found out that
the panels have a hundred time higher air-tightness capability than essentially the most qualified windows. Furthermore, the panels used on
the wall are manufactured as hidden screw and subsequently, aesthetic look is provided with none seen screw.
With a careful planning, nice enlargement and renewals will be performed without having any impact on the activities
within the building. It enables the performance of longitudinal and lateral additions in accordance with the construction of the
structure. Also, because the panels may be disassembled after which assembled again, they provide practical advantages in phrases
of financial system and application.
The sandwich panels rapidly amortize their cost. In addition to the economical advantages offered throughout the meeting,
the panels have more certain amortization advantages compared to other building materials with their energy saving
because of the thermal insulation. By means of reviewing the thermal conductivity values of the materials, the financial savings obtained
from the thermal insulation could be simply determined comparatively. The polyurethane-crammed sandwich panels have lower
thermal transmission coefficient than all other similar thermal insulation materials and subsequently, cause high insulation
values and energy earning. Due to this fact, the resources are protected. Even electrical generation might be attainable by means
of finding sun skylights on the panels. In addition to the transportation time and prices, since the sandwich panels are
light and transmit less load to the bearing system of the structure, they reduce the essential development prices too and have
constructive impact. Furthermore, they’ve low-cost maintenance besides their lengthy-term utilization possibility. The modern
coatings on the panels enable the maintainability of the sandwich panels since they provide protection towards high stage
of corrosion and ultraviolet rays.
If you enjoyed this write-up and you would such as to get additional details pertaining to تری دی پنل kindly see the site.